Precision Machining
- CNC Machining Service
- CNC Milling
- CNC Turning
- Automatic Turning
- Machining Screw/Rivet
- Wire EDM Machining
- Casting & CNC
- Aluminum Profile & CNC
- Cold Heading & CNC
High strength and toughness, fatigue resistant. Alloy steels incorporate additional alloying elements beyond carbon, leading to heightened hardness, toughness, fatigue resistance, and wear resistance
Grade & Composition | Key Characteristics | Primary Applications |
---|---|---|
Homopolymer (Delrin®) (e.g., Delrin 100) | • Density: 1.41-1.42 g/cm³ • Tensile strength: 70-75 MPa • HDT @0.45 MPa: 160°C • Low friction (μ=0.15-0.25) | • Precision gears • Bearings & bushings • Snap-fit components |
Copolymer (Acetal) (e.g., Celcon M90) | • Density: 1.40-1.41 g/cm³ • Tensile strength: 60-65 MPa • HDT @0.45 MPa: 155°C • Better chemical resistance | • Chemical valves • Fuel system components • Medical devices |
25% Glass Fiber Reinforced (e.g., Delrin 570) | • Density: 1.58-1.62 g/cm³ • Tensile strength: 110-120 MPa • HDT @0.45 MPa: 165°C • Reduced creep deformation | • Automotive components • High-load bearings • Structural parts |
PTFE Lubricated Grade (15-20% PTFE) | • Ultra-low friction (μ=0.05-0.15) • Superior wear resistance • Service temp: -40°C to 100°C | • Self-lubricating bearings • Seals & gaskets • Slide mechanisms |
Property | Test Standard | Homopolymer | Copolymer | 25% GF |
---|---|---|---|---|
Tensile Strength | ISO 527 | 70-75 MPa | 60-65 MPa | 110-120 MPa |
Flexural Modulus | ISO 178 | 2.8-3.0 GPa | 2.5-2.8 GPa | 7.0-7.5 GPa |
HDT @0.45 MPa | ISO 75 | 160°C | 155°C | 165°C |
Impact Strength | ISO 179 | 90-100 kJ/m² | 80-90 kJ/m² | 45-55 kJ/m² |
Coefficient of Friction | ASTM D1894 | 0.15-0.25 | 0.18-0.28 | 0.20-0.30 |
Water Absorption (24h) | ISO 62 | 0.2-0.3% (all grades) |
•Drying: Mandatory at 80-110°C for 2-3 hours (moisture ≤0.2%) to prevent bubbling and surface defects
•Melt Temperature: 190-210°C (±5°C tolerance) - degradation occurs above 230°C
•Mold Temperature: 80-120°C for homopolymer, 80-110°C for copolymer
•Fuel Systems: Resistant to gasoline, diesel, and biofuels (service life 10+ years)
•Window Mechanisms: Low friction and high wear resistance for regulator systems
•Engine Components: Under-hood parts withstand continuous 120°C operation
•Solvent Resistance: Excellent resistance to hydrocarbons, alcohols, and ketones
•Acid/Alkali Resistance: Limited resistance to strong acids and bases
•UV Stability: Requires UV stabilizers for outdoor applications
On December 12 , 2019,LML welcomed three customers again.
Read more about quality assuranceOn December 12 , 2019,LML welcomed three customers again.
Read more about quality assuranceOn December 12 , 2019,LML welcomed three customers again.
Read more about quality assuranceTake advantage of our network and see what LML can do for you